Top 6 Problems With Acrylic Nails and Their Treatment

At Exodus Nails & Co., we deal with the manufacturing of high-quality pedicure and manicure products that can be both skin and pocket friendly. Moreover, we serve you with the resources you are looking for in your troubleshooting needs. The artificial nail industry is showing positive science and signs, and being a part of it, we would like to help you learn about the most common difficulties you may experience with your fake nails.

 

Runny Acrylic –

 

It is usual that when the acrylic is placed on your fingernail, it should hold its shape. If you find your acrylics melting, you must know that your nail technician played a game of beat the clock with you. This type of situation is challenging as you can't hold your acrylic nail problems to the point where you desire them to be, and in addition, you will not be able to get the desired results in the coming days.

  •         Incorrect Liquid to Powder Mix Ratio –

If you get a running acrylic, it is a clear sign that you are using a wet brush or too much liquid.

Recommendation –


Use a 1.5 to 1 ratio of well-balanced liquid to powder. However, keep a watch for seasonal temperature changes and humidity; based on these factors, you will need to recalibrate your liquid to powder usage.


  •         Temperature Imbalance –

 

Even though you apply your acrylics in a controlled environment, in terms of salon and the product, the temperature of fingernails varies from person to person: the faster the curing time, the warmer your liquid and powder, and vice versa.


Recommendation –


Make sure to avoid any temperature difference; if you find your finger is cool to touch, then it is suggested that you warm the product and bring it to an equivalent temperature where both the temperature of your fingernails and that product will be near similar.

 

Bubbling Acrylic –

 

One of the biggest problems with applying acrylics is the formation of bubbles; it is common in the case of new nail appointees. Even when you think you have done everything perfectly, bubbles in acrylic nails will show up and scramble your confidence. Below are the most common reasons for bubble formation.

  •         Incorrect Liquid to Powder Mix Ratio –

If more than enough moisture is present in the mixture, then tiny bubbles will be formed that will eventually grow in size. Whereas, if it's too dry, air will be trapped inside the powder, making it thick during the initial application.


Recommendation –


It is recommended to add liquid and powder in a ratio of 1.5: 1. To account for the seasonal changes, calibration needs to be done accordingly.


  •         Incorrect Application –

 

Professional nail technicians ensure not to let the air be trapped inside the brush, adding bubbles to the mixture. On the other hand, if you are fond of applying multiple layers of paints, then overworking can form air bubbles under nails.


Recommendation –


You can gently submerge your brush hairs in the bottom of your liquid dish; this will ensure that no air is trapped in it; make sure that your brush hairs are saturated in the monomer. It is advised to remove trapped air bubbles by smoothly pressing them.


  •         Curing Too Fast –

 

As the saying goes, faster doesn't mean better results. When the acrylics dry out quickly from the top, then the bubbles present inside don't get time to escape and get trapped under the curved surface.


Recommendation –


You can switch to a standard set powder; this will enhance the natural time for your product to set down and release the pesky air bubbles before the uppermost layer dries out.

 

Cracking Acrylic –

 

An acrylic establishment under normal circumstances can be determined in terms of strength and flexibility, but one should avoid cracking. No one will like to get their enhancements broken/cracked. Moreover, you need to take care that if your enhancement is too strong, it will also damage your natural nails due to its strong enough impact. If you are using EMA monomers, then there are a few bad acrylic fill reasons why your enhancements are cracking.

  •         Incorrect Liquid to Powder Mix Ratio –

Too much moisture can weaken the balance between flexibility and strength. Whereas too dry can not hold on to the enhancement together, lowering the power and reducing internal adhesion.


Recommendation –


It is recommended to add liquid and powder in a ratio of 1.5: 1. To account for the seasonal changes, calibration needs to be done accordingly.

  •         Over-Filing the Enhancement –

 

This will compromise the molecular structure of the enhancement and result in a breakdown.


Recommendation –


File with a gentle touch and strictly avoid using abrasive, coarse, and electric files.

 

Lifting Acrylic –

 

In numerous circumstances, it has been witnessed that customers come up with their phrases to deflect responsibility for lifted acrylic nails; they usually do this to run out of their fault. It isn't easy to understand and believe the customers who claim such lifting too so and so causes. They need to realize that the nail technician is an expert and knows what must have gone through the series. After all, nails don't come off in a matter of seconds, this occurs over time, and they must have noticed when it starts to come off but remained quiet. Customers must be aware that this may not be a long-time joke as it has long-term consequences as it worsens daily. Below are the following reasons why lifting can occur –

  •         Contamination –

 

Contamination affects the product's performance and chemistry, producing unpredictable results.


Recommendation –


Cleaning the nails with a monomer and delicacy brush for sculpting is advised, and it is not recommended to use oils for bristling purposes.

 

 

 

  •         Improper Application –

 

The bond between the enhancement and the natural nail loosens if the enhancement is not applied correctly. After a while, the natural lumpy acrylic nails will become almost non-existent.


Recommendation –


During the application process, avoid coming in contact with soft tissues. To prevent such occurrence, leave a free margin around the cuticle and sidewall. To improve the adhesion, press to smooth the product onto the nail.


  •         Incorrect Liquid to Powder Mix Ratio –

Too much moisture can weaken the balance between flexibility and strength. Whereas too dry can not hold on to the enhancement together, lowering the power and reducing internal adhesion.


Recommendation –


It is recommended to add liquid and powder in a ratio of 1.5: 1. To account for the seasonal changes, calibration needs to be done accordingly.

 

Yellowing Acrylic –

 

It is always recommended to ensure that the work has been completed with the best possible results; this way, you can ensure that the nails do not turn yellow. It will even turn out to be worse when you discover that the acrylics turn yellow because of something you could have prevented. A few of the fake nail problems include –

  •         Product Contamination –

 

An unclean environment will lead to uncontrollable undesirable results; one such case is yellowing.


Recommendation –


Always keep the bottleneck closed and place the liquid and powder far away from each other. Don't use an all-purpose brush; try to have a definite brush for your acrylics that is properly stored, cleaned, and maintained. Nail technicians must be thorough with the use of fresh monomer for each client.


  •         Wet Acid-Based Primer –

 

This can chemically contaminate the powder and liquid mix and cause yellowing. You will also have to face discoloration when applying acrylic to the nail before the primer completely dries.


Recommendation –


Use a magic bond primer, which is non-etching, non-etching, and non-acid. This way, you can allow it to dry completely and avoid this circumstance.

 

Irritation –

 

The skin type varies from person to person, so it makes sense that the application of acrylics will also go. If a client is allergic to such materials, they are advised to restrict her from receiving such services. But, when you take proper care of the acrylics, you can avoid irritation and other painful problems. Some potential anger causes include chemical damage, natural nail damage, and improper damage. Acrylic nail solution is essential to cure the problem of its root.


Conclusion –

 

At Exodus Nails and Co., we are known for our enhancement works, and we deal with the manufacturing of high-quality products for acrylic nails. If you are facing issues with fake nails Australia, then feel free to get in contact, and our experts will put an end to your queries.